Bio Medical Instrumentation Trainer Manufacturer,Supplier and Exporter in India
Product Code : SCL-MDE-12452
Indian Lab Suppliers offers the Bio Medical Instrumentation Trainer (Product ID: 12452) as part of its Medical Diagnostic Equipment range under Hospital Lab Equipment. This is a modular biomedical instrumentation platform built around a master unit with PC interfacing, onto which experiment panels and detachable sensor modules are fitted – the RPM/BPM/HRM/Pulse Oximeter panel (BM1) described here covers pulse oximetry, blood pressure, lie-detector (skin-contact) and stethoscope experiments on a single bench setup.
Quick Answer
This is a modular Bio Medical Instrumentation Trainer: a master unit supplying regulated DC power and a PC interface (Computer Interface Adaptor, or CIA, optoisolated against wrong-connection damage, with USB and parallel-port options, DAC channels, a V-to-I converter block and a V-to-PWM block), onto which experiment panels are fitted. The RPM/BPM/HRM/Pulse Oximeter experiment panel (BM1) supplied with this listing includes an LED driver, I-to-V converter, sample-and-hold circuit, an in-panel blood-pressure sensor (300mmHg), band-pass filters, an analog-to-square-wave converter, a Wheatstone bridge and instrumentation amplifier, a skin-contact (lie-detector) go/no-go circuit, and an AC amplifier – together with detachable sensor modules for pulse oximetry, lie detection, temperature, blood pressure (sphygmomanometer) and an electret-microphone-based electronic stethoscope.
Key Features
Modular master unit plus experiment-panel architecture · Regulated multi-rail DC power supply · Optoisolated PC interface (CIA), protects PC parallel port from wrong connections · USB I/O module and PC graph-utility software for waveform measurement · Built-in MIC pre-amplifier, audio amplifier and loudspeaker · Level-shift cards for PC-compatible signal ranges · RPM/BPM/HRM/Pulse Oximeter experiment panel (BM1) with 16 banana sockets and 3 test points · Detachable sensor modules: pulse oximeter probe, lie detector with calibration, temperature sensor, sphygmomanometer/blood pressure apparatus, electronic stethoscope probe (electret mic) · Supplied with 16 patch cords (assorted lengths)
Key Specifications
| Parameter | Specification |
|---|---|
| Power supply (master unit) | DC 5V/1A; ±12V/500mA; 0 to 15V DC variable/100mA; 0 to -15V DC variable/100mA |
| Computer interface | Optoisolated CIA; 25-pin parallel interface via 25-pin M-to-F cable, 1m (PC/PC parallel port not in scope of supply); USB I/O module via Type A to mini-B cable |
| DAC channels | 4 channels, 0 to 2.5V full scale; 1 channel, 2.5V full scale output |
| V-to-I function block | Input 0–2.5V DC; output 0–20 or 4–20mA into 100Ω load (max.) |
| V-to-PWM function block | Input 0–2.5V; output 1kHz PWM, ±9V |
| PC software | USB-based graph utility software for waveform measurement (PC/Windows compatible) |
| MIC pre-amplifier | Handheld electret microphone; DC gain 1, AC gain 50 |
| Audio amplifier | Gain 20; built-in loudspeaker, 8Ω/500mW, with earphone option |
| Level shift cards | 2 units, converting ±9V to 0–2.5V for PC interfacing |
| Operating voltage | 220/240V AC, switch-selectable, ±10%, 50Hz, 35VA |
| Master unit dimensions | Height 160mm, depth 350mm (width value missing on the source spec sheet; please confirm with us); net weight approx. 7.5kg, gross weight approx. 9.5kg |
| Experiment panel dimensions | Approx. 215mm(W) x 165mm(H) x 40mm(D); net weight approx. 700g |
| Patch cords supplied | 16 nos., 4mm male, mixed lengths (2 at 120mm, 14 at 500mm) |
| Panel BM1 (RPM/BPM/HRM/Pulse Oximeter) | 16 banana sockets, 3 test points; LED driver at 350Hz (Red & IR LED); I-to-V converter; sample & hold circuit; in-panel blood-pressure sensor (300mmHg); shares MIC pre-amplifier and loudspeaker with master unit; band-pass filters (11Hz & 1.6Hz); analog-to-square-wave converter; Wheatstone bridge; instrumentation amplifier (gain X50 & X1); skin-contact (lie-detector) go/no-go circuit; AC amplifier (gain X20) |
| Detachable sensor modules | Pulse oximeter probe/module; lie detector with calibration; temperature sensor; sphygmomanometer/blood pressure apparatus; electronic stethoscope probe/module using electret mic |
Where This Is Used
This platform suits biomedical engineering laboratories running a broad curriculum – pulse oximetry, blood pressure measurement, heart-rate/respiration monitoring, skin-contact (galvanic) response, and electronic stethoscope work – on a single modular bench system rather than separate standalone instruments. It complements our other biomedical instrumentation trainers, including the Blood Pressure Measurement Trainer and Pulse Rate Meter Trainer, within the wider Medical Diagnostic Equipment range. Browse the full laboratory equipment range for related training and diagnostic instruments.
Why Buy from Indian Lab Suppliers
Indian Lab Suppliers is an India-based laboratory equipment manufacturer and exporter supplying hospital and biomedical training equipment to institutions and distributors worldwide. Every order can be supplied with export documentation, and a Certificate of Origin is available on request to support customs clearance.
Frequently Asked Questions
What is the Bio Medical Instrumentation Trainer?
It is a modular master-unit-plus-experiment-panel platform for biomedical instrumentation study, with this listing supplying the master unit and the RPM/BPM/HRM/Pulse Oximeter (BM1) experiment panel and its associated sensor modules.
What experiments does the BM1 panel support?
Pulse oximetry (LED driver, I-to-V converter, sample & hold), blood-pressure measurement (in-panel 300mmHg sensor), skin-contact/lie-detector response, and general signal-conditioning study using its band-pass filters, Wheatstone bridge and instrumentation amplifier.
Can readings be captured on a PC?
Yes, via the optoisolated Computer Interface Adaptor (CIA) and USB I/O module, using the supplied USB-based graph utility software for waveform measurement.
What detachable sensor modules are included?
A pulse oximeter probe, a lie detector with calibration, a temperature sensor, a sphygmomanometer/blood pressure apparatus, and an electronic stethoscope probe using an electret microphone.
Is the master unit's width specified?
The source spec sheet lists the master unit's height and depth but the width value is missing; please contact us to confirm this dimension before specifying.
Related Categories
Explore the full Medical Diagnostic Equipment category, part of our wider laboratory equipment catalogue.
Request a Quote
For pricing, lead time and export documentation, please contact us or submit your requirement through our lab tender page.
.png)
.png)