Solid State Electro surgery 250W / 500W Manufacturer,Supplier and Exporter in India
 (1).png)
Product Code : SCL-MDE-12417
Indian Lab Suppliers offers the Solid State Electro Cautery (Electrosurgery) Trainer, 250W/500W (Product ID: 12417) as part of its Medical Diagnostic Equipment range under Hospital Lab Equipment. This is a biomedical-instrumentation trainer that demonstrates monopolar and bipolar electrosurgery/cautery techniques, and belongs to the same trainer-kit family as our other diagnostic and therapeutic-equipment trainers. Note: the source specification abbreviates "Coagulation" as "Coug"/"Bicoug" – this is presented here using the standard electrosurgery terms Coag/Bicoag (Coagulation/Bipolar Coagulation) as an unambiguous correction of what appears to be a typographical shortening.
Quick Answer
This is a Solid State Electro Cautery trainer that demonstrates how monopolar and bipolar electrosurgical generators work, covering Cut, Coagulation and Bipolar Coagulation modes at an operating frequency below 350 KHz and selectable output power of approximately 250W or 500W. It includes monopolar, bipolar and patient-plate electrodes, a foot switch and pencil switch, a patient-plate-open audible/visible safety alarm, and front-panel test points – making it suited to biomedical instrumentation and allied-health training labs rather than direct clinical patient use.
Key Features
Solid State Electro Cautery / Electrosurgery trainer · Monopolar & Bipolar modes · Cut, Coagulation and Bipolar Coagulation modes · Operating frequency below 350 KHz (approx.) · Selectable output power: approx. 250W or 500W · Controls for output power, Cut/Coag, Bicoag, Unipolar, Bipolar, Pure Blend, Audio and foot switch · Monopolar, bipolar and patient-plate electrodes · 4mm output sockets for Cut/Coag, Bicoag, patient plate and pencil switch, plus a foot-switch jack · Patient-plate-open audible & visible alarm · Audio & visible indication for Cut, Coag and Bicoag · Front-panel test point via 2mm socket
Key Specifications
| Parameter | Specification |
|---|---|
| Modes | Monopolar & Bipolar; Cut, Coagulation, Bipolar Coagulation |
| Operating frequency | Below approx. 350 KHz (±) |
| Output power | Approx. 250W (±) / 500W (±), selectable |
| Controls | Output power, Cut/Coag, Bicoag, Unipolar, Bipolar, Pure Blend, Audio, foot switch |
| Electrodes | Monopolar, Bipolar and Patient plate |
| Output sockets | 4mm for Cut/Coag, Bicoag and Patient plate; Pencil Switch & jack for foot switch |
| Alarm / indication | Patient-plate-open audible & visible alarm; audio & visible indication for Cut, Coag, Bicoag |
| Accessories | Patient plate, unipolar & bipolar electrode set, handle, foot switch, pencil switch |
| Test point | Top of instrument, via 2mm socket |
| Power supply | 230V / 50Hz |
| Dimensions | Approx. 375 x 150 x 300mm (±) |
| Standard accessories | Operating manual covering instrument working, operating & installation procedure, block diagrams, connection diagrams, electrode placement, standard signals & actual output signal, calculations, tables, troubleshooting, and an experiments list |
Where This Is Used
This trainer kit is intended for biomedical engineering and paramedical training laboratories teaching the principles of electrosurgery/electrocautery generators, including the difference between monopolar and bipolar techniques. It belongs to the same biomedical-instrumentation trainer family as our Blood Cell Counter Demonstration Trainer Kit, Ultrasonic Blood Flow Measurement Trainer Kit and BP Cal & Measurement Trainer Kit, all part of the wider Medical Diagnostic Equipment range. Browse the full laboratory equipment range for related training and diagnostic instruments.
Why Buy from Indian Lab Suppliers
Indian Lab Suppliers is an India-based laboratory equipment manufacturer and exporter supplying hospital and biomedical training equipment to institutions and distributors worldwide. Every order can be supplied with export documentation, and a Certificate of Origin is available on request to support customs clearance.
Frequently Asked Questions
What modes does this electrosurgery trainer cover?
Monopolar and Bipolar modes, including Cut, Coagulation and Bipolar Coagulation, so students can study the difference between monopolar and bipolar electrosurgical techniques.
What output power levels are available?
Approximately 250W or 500W, selectable, at an operating frequency below approximately 350 KHz.
What safety features are built in?
An audible and visible alarm that triggers if the patient plate connection opens, plus audio and visible indication for each active mode (Cut, Coag, Bicoag).
What accessories are included?
A patient plate, a set of unipolar and bipolar electrodes with handle, a foot switch and a pencil switch.
Is this used for actual surgery?
No – this is an instructional trainer for biomedical instrumentation and allied-health education, used to teach how electrosurgery/electrocautery generators work, not for performing clinical procedures.
Related Categories
Explore the full Medical Diagnostic Equipment category, part of our wider laboratory equipment catalogue.
Request a Quote
For pricing, lead time and export documentation, please contact us or submit your requirement through our lab tender page.
.png)
.png)
.jpeg)