Baby Incubator Microcontroller Manufacturer,Supplier and Exporter in India
Product Code : SCL-MDE-12412
Indian Lab Suppliers offers the Baby Incubator Microcontroller Trainer Kit (Product ID: 12412) as part of its Medical Diagnostic Equipment range under Hospital Lab Equipment. Note on naming: although the product is titled "Baby Incubator," the specification sheet on file describes a microcontroller-based training and demonstration kit that simulates the sensing and control logic of an infant incubator, rather than a clinical incubator itself — this is an educational/biomedical-instrumentation trainer, and buyers requiring an actual functioning infant incubator should confirm this distinction with our sales team before ordering.
Quick Answer
This is a microcontroller-based Baby Incubator Trainer Kit built for teaching how an infant incubator's temperature-sensing and heater-control loop works. It uses two PT100 temperature sensors (one for body temperature, one for canopy/ambient temperature), a 1000W (approx.) heater element, a 16x2 LCD display for readouts, and front-panel test points so students can probe signals at each stage of the control circuit. It is supplied with an operating manual covering installation, block diagrams, connection diagrams and electrode placement, making it suited to biomedical instrumentation and allied-health training labs rather than direct clinical bedside use.
Key Features
Microcontroller-based trainer kit for baby incubator sensing & control · Two PT100 temperature sensors – Body and Canopy · Heater element rated approx. 1000W · Front-panel Key Set: UP, Down, Enter for setting parameters · High/Low indication with 16x2 LCD display · Front-panel test points for signal tracing at each circuit stage · Onboard amplifier stage with Heater ON/OFF indication output · 2mm socket test-point output for connecting an external meter or oscilloscope · Supplied with a detailed operating manual, block diagrams, connection diagrams and electrode-placement guide
Key Specifications
| Parameter | Specification |
|---|---|
| Sensors | 2 – Body Temperature Sensor & Canopy Temperature Sensor (Sensor type: PT100) |
| Heater | Approx. 1000W (±) |
| Temperature range (as listed) | 0 to 400°C (Set) – figure as recorded on file; please verify with our team, as this reads high for an incubator-simulation range and may be a transcription of 0–40.0°C |
| Controls | Key Set – UP, Down, Enter |
| Display | 16x2 LCD with High/Low indication |
| Test points | Provided on front panel of instrument; Amplifier and Heater ON/OFF indication output; Output test point on 2mm socket |
| Power supply | 230V / 50Hz |
| Dimensions | Approx. 600 x 300 x 500mm (±) |
| Standard accessories | Operating manual covering instrument working, operating & installation procedure, block diagrams, connection diagrams, electrode placement and standard signal references |
Where This Is Used
This trainer kit is intended for biomedical engineering and paramedical training laboratories that teach the working principles behind infant-incubator temperature control, alongside broader coursework in patient monitoring. Institutions setting up such labs often pair it with our clinical-grade diagnostic instruments from the same Medical Diagnostic Equipment range, such as the Physiograph (ECG/EEG/EOG/EMG/PCG/GSR/RRM/PMG/Temp, 6-Channel, USB) our Blood Pressure Monitor (BP) Trainer from the same trainer-kit family, and our ECG/SpO2/BP Patient Monitor, to give students a combined view of real diagnostic hardware and the underlying sensor/control theory. Browse the full laboratory equipment range for related training and diagnostic instruments.
Why Buy from Indian Lab Suppliers
Indian Lab Suppliers is an India-based laboratory equipment manufacturer and exporter supplying hospital and biomedical training equipment to institutions and distributors worldwide. Every order can be supplied with export documentation, and a Certificate of Origin is available on request to support customs clearance. Our team can confirm exact specifications, including the temperature-range figure noted above, before you place an order.
Frequently Asked Questions
Is this a real, clinical baby incubator or a training kit?
Based on the specification sheet on file, this product is a microcontroller-based trainer/demonstration kit that simulates incubator temperature sensing and heater control – it is intended for instructional use, not direct clinical patient care. Please confirm with our sales team if you need a clinical incubator instead.
What sensors does the trainer kit use?
It uses two PT100 temperature sensors – one for body temperature and one for canopy (ambient) temperature – feeding into an onboard amplifier and control circuit.
What is the listed temperature range, and is it accurate?
The specification on file lists "0 to 400°C (Set)." This figure is unusually high for incubator simulation and may be a transcription of a smaller range (such as 0–40.0°C); we present it as recorded and recommend confirming the exact figure with our team before ordering.
What does the standard accessory package include?
An operating manual covering the working of the instrument, operating and installation procedure, block diagrams, connection diagrams, electrode placement guidance and standard signal references.
What power supply does it need?
Standard 230V / 50Hz single-phase supply.
Can this be customized for a specific curriculum?
As a manufacturer, we can discuss configuration and documentation adjustments for specific training programs – contact our team with your curriculum requirements.
Related Categories
Explore the full Medical Diagnostic Equipment category, part of our wider laboratory equipment catalogue.
Request a Quote
For pricing, lead time and export documentation, please contact us or submit your requirement through our lab tender page.
.png)
.jpg)
.jpeg)